Magnetic grinders will have problems after long-term use. If there is a problem with the magnetic grinder, it will delay working time and is likely to waste raw materials. So, what are the common problems of magnetic grinders? Let me tell you.
1.The machine vibrates violently. Make sure to apply pressure to every corner of the magnetic grinder and adjust the length.
2.If the indication is normal but the machine does not work, check whether the voltage is less than 220 volts.
![What are the common problems of magnetic grinding machines?-Guangu Magnetic deburring machine What are the common problems of magnetic grinding machines?-Guangu Magnetic deburring machine](https://www.bvsud.com/wp-content/uploads/2024/07/878f8a70-d2ac-44fd-b806-f6d8e09770a9.jpg)
3.Replace the water in the polishing barrel in time to maintain the normal water temperature range (normal water temperature range is 50°C).
4.The polishing barrel is leaking. There is a polishing needle under the thorn, which can be removed with pliers.
5.The timer does not flash. If you do not press the start switch, you can press the timer.
The above is the introduction to the relevant content of the magnetic grinder.I hope it can help friends in need. Thank you for browsing.
You must be logged in to post a comment.